grandstream

Hi all, I was wondering if I could use the FusionPBX contacts and upload them to a Grandstream phone. Well, it doesn’t work out of the box. As I have it working now and it took a lot of my time, I will share it with this forum. I’m using the latest FusionPBX 5.1 and Freeswitch 1.10.11...

Having a wierd issue and I need help! I have a customer that has a bunch of phones at one location, they had internet issues last week and the ISP fixed the issue, since then I'm having an issue with their phones. They have Grandstream and yealink phones, all phones are provisioned directly...

.

I recently created a new tenant. This tenant is using GS GXP2170 phones (I typically use yealink). The latest firmware v1.0.11.71 is also installed. Inbound and outbound calls are working fine. Calls from the GS phone to the PSTN or another extension are able to place the call on hold and...

Hi all Had to spend some considerable time to get a Grandstream HT802 ata working with our alarm panel/alarm company. Caveat emptor using voip for a security panel may not be your best choice. Just saying. It took a while to comb through sites and test/learn but finally we nailed it and this...

I have a Grandstream FXO configured as outgoing trunk: Device FXO port is registered with above user/password: Looking at Gateway settings I can't figure out how to duplicate this configuration. Please advise.

Hi, I have a ring group with three extensions for two Yealink phones and a regular cordless phone connected through the Grandstream HT812 ATA. If someone picks up one of the Yealink phones, the other Yealink phone stops ringing, but the cordless rings at least two additional times. I saw this...

Hi all, I am having an issue with Auto provisioning the GRP2613 phones, we also have some GXP2170s that provisioned perfectly fine but the GRP2613 do not want to. We can manually provision them and they work, but we would like to get the auto provisioning working. We used the same auto...

Grandstream GXP2160s - Latest Firmware - New client This does work when testing from our GXP2160s. The issue seems to be for all phones of this single client. User places or receives a call Presses the conference button (icon with 3 people on it) No dial tone at this point (there should be)...

Hi guys, I am facing issues with auto provisioning Grandstream phones using fusion .when i provision the device with the server it works fine .but after provision my admin pass not working anymore.I set a password from Default settings of the system .but that password also not working .Can...

Hi.. I've been trying to Auto provision Granstream GXV3275 Phone with Fusion Pbx 4 but I don't understand how this gonna work. I've enabled provisioning config path: http://domainname/app/provision but still, it doesn't work

I have a customers' phone system I'm trying to install on our FusionPBX hosted system. Here's all the information I have: Starting Setup: Ext. 201: Yealink T48S Desk Phone and Yealink W60B Base Station w/ 2 Handsets Ext. 202: GroundWire Softphone Ext. 203: Grandstream GXP2135 Ext. 204...

I have a GXP-2135 that I am connecting to a 4.2 FusionPBX server. Both are on the same network. Internal calls and incoming calls work fine. When I make a call to an outside number, the call will disconnect after 32 secs. I have a bunch of Cisco SPA-514Gs that are all connected the same way...

good morning I have a problem in particular is that the grandstream phone model gxp285 does not receive both internal and external calls, shows as disconnected calls when picking up the receiver to answer, that happens between phone calls ip to ip phone of the same model and different models...

The Status > Registrations page provides the button to cause a registered device to re-provision itself. The button causes FreeSwitch to send a SIP NOTIFY message to the device, with differing "Event" property values, depending on the brand. We use Grandstream GXP2130/60's, and clicking that...

We've decided to include the XML phonebook in our provisioning of our GXP2130 and 60 phones. FusionPBX doesn't come with the files to support that, so here's a basic one we made that works with extensions, first and last names, and contact photos. Create a file called "phonebook.xml" in each...

We have a bunch of GXP2130's and a GXP2160, all provisioned using FusionPBX. We've allowed users to customize the Virtual Multi-Purpose Keys and Multi-Purpose Keys on the phones using FusionPBX (see http://www.pbxforums.com/threads/assign-device-to-user.485/#post-1929), but FusionPBX doesn't...

Hello, I was wondering if anyone had ever configured BLF Parking with FusionPBX either with a Grandstream phone or any other phone. I have One-Button parking working great, but I would like to be able to see the status of a park slot on my phone. Currently, I have a Grandstream GXP 2170 and a...