Hi, dears,
I have to install a VOIP server, I like FreeSWITCH it looks so powerful, I found fusion PBX they did a great job making FreeSWITCH so much easy to configure, but I have few question I really appreciate if you could support me to answer those question,
My installation looks like this:
SIP USERS <----------> [ 172.20.20.100 ] <- |FPBX| -> [ 172.16.16.100 ] <----------> GATEWAY
The FPBX has 3 interfaces:
1- 192.168.44.x (Management and Internet access)
2- 172.20.20.x (Internal SIP users)
3- 172.16.16.x ( Connected to the gateway for outbound calls)
Questions are:
1- Do I need to create 2 domain, (172.20.20.100, 172.16.16.100) ?
2- In the Internal SIP profile, I should use which IP for external SIP IP in SIP profile configuration?
3- The default installation of FPBX is using management IP and by default, it will create that domain (192.168.44.100), shall I remove it ?
4- The default value of ${{local_v4_ip}} variable will be management IP, which then it is referred in the FPBX SIP profile settings then the local SIP users they cannot register since they don't have access to that network, shall I change the ${{local_v4_ip}} in the Variable setting or what ?
5- Can I change the external SIP port to something else or let both internal and external listening on 5060 ?
6- In the adding gateway form, there are 2 fields what should I add, 1- From Domain ? 2- Context ? , 3- I am adding the gateway IP and its port inside Proxy field, is that correct ?
7- Can I delete or Disable Internal v6 and external v6 profiles since I am not going to use them ?
8- In my setup, the calls from internal to external should be okay in terms of callee_number, what about internal to external, does FPBX will pass the callee_id_number correctly to the external gateway correctly by default or should I do some configuration for that ?
Thanks for answering.
I have to install a VOIP server, I like FreeSWITCH it looks so powerful, I found fusion PBX they did a great job making FreeSWITCH so much easy to configure, but I have few question I really appreciate if you could support me to answer those question,
My installation looks like this:
SIP USERS <----------> [ 172.20.20.100 ] <- |FPBX| -> [ 172.16.16.100 ] <----------> GATEWAY
The FPBX has 3 interfaces:
1- 192.168.44.x (Management and Internet access)
2- 172.20.20.x (Internal SIP users)
3- 172.16.16.x ( Connected to the gateway for outbound calls)
Questions are:
1- Do I need to create 2 domain, (172.20.20.100, 172.16.16.100) ?
2- In the Internal SIP profile, I should use which IP for external SIP IP in SIP profile configuration?
3- The default installation of FPBX is using management IP and by default, it will create that domain (192.168.44.100), shall I remove it ?
4- The default value of ${{local_v4_ip}} variable will be management IP, which then it is referred in the FPBX SIP profile settings then the local SIP users they cannot register since they don't have access to that network, shall I change the ${{local_v4_ip}} in the Variable setting or what ?
5- Can I change the external SIP port to something else or let both internal and external listening on 5060 ?
6- In the adding gateway form, there are 2 fields what should I add, 1- From Domain ? 2- Context ? , 3- I am adding the gateway IP and its port inside Proxy field, is that correct ?
7- Can I delete or Disable Internal v6 and external v6 profiles since I am not going to use them ?
8- In my setup, the calls from internal to external should be okay in terms of callee_number, what about internal to external, does FPBX will pass the callee_id_number correctly to the external gateway correctly by default or should I do some configuration for that ?
Thanks for answering.
