Search results

  1. K

    Iptables Port Settings

    Is anyone familiar with the reasons for the various port settings needing to be opened in iptables? Here are the ones that are recommended: udp 1194 udp 16384:32768 ----------------------------------------------- By the way, regarding incoming, port 22 is not needed if not remotely connecting...
  2. K

    Define Normal Dial Plan

    Does anyone know where to configure the "normal dial plan", or see its settings, as mentioned in Inbound Routes?
  3. K

    FusionPBX Blocks Webmin

    Raspberry Pi with OS Lite. It does not matter if Webmin is installed first or FusionPBX is, once FusionPBX is involved the remote connectivity to Webmin is broken. The login is normally something like 192.168.1.10:10000. Port 10000 ceases to be available, but I don't know what Fusion does to...
  4. K

    SOLVED Raspberry Pi Install Script Unavailable

    When attempting to use: wget -O - https://raw.githubusercontent.com/fusionpbx/fusionpbx-install.sh/master/debian/pre-install.sh | sh; I'm getting a 404 error. Did the address or script change in some regard?
  5. K

    Documentation Questions

    It might be nice to have a forum section just for questions on the documentation. It seems it would be helpful to be able to go to just one place to see if anyone had a similar question on the subject. What do you think?
  6. K

    Forward

    What is the significance of the use of the word "Forward" in the Dashboard? I understand call forwarding, of course, but do not understand why the word is used as it is. For instance, there is a section entitled Call Forward and Ring Group Forward. Thanks.
  7. K

    Glossary

    A Glossary thread might be nice where everyone could add words and definitions as they go.
  8. K

    No Inbound Calls

    I had great success configuring the PBX yesterday and today. I actually can receive a call inbound to my extension. That is wonderful. However, what is surprising is that no calls come in. When calling in, the caller hears ringing, but no answer. Any ideas? Thanks.
  9. K

    Registration

    Is it possible for the pbx to see itself as registered when the provider does not? My current experience says it is so, but I do not know why.
  10. K

    Password Change Recovery

    For some unknown reason, the FusionPBX password changed. I know I did not do it on purpose. So now I need to recover. Going to the documentation, I followed the instructions for Password Reset, but the documentation contains errors as to what should happen and it appears impossible to...
  11. K

    This account number is not valid

    When I dial out on my Yealink W60P system, I get a message saying "This account number is not valid". It is a woman's voice. I do not know where it is coming from; the PBX software or the Yealink phone. Has anyone heard of this before or know what it means?
  12. K

    YeaLink W60P

    My Yealink W60B base station cannot make the W56H handset connect to the PBX, so I must assume I have an incorrect connection configuration for the base station. Does anyone know what I should set in the base station web interface to make it work with my FushionPBX/FS system?
  13. K

    Network Login

    When I try to access the FusionPBX server from another computer on the network, I can type in the IP address and the login screen comes right up. But try as I might, the screen will not accept the log-in credentials that work fine on the server itself. What am I missing?
  14. K

    Proper Order of Configuration Steps

    I am finding an issue with a lack of clear direction over what comes first in the configuration of the PBX software. The provider says to start with the truck configuration. Of course there isn't anything named that in FusionPBX like there is in FreePBX, but we don't want to go there. I...
  15. K

    Passwords and Usernames

    There seems to be a little confusion over the use of passwords and usernames throughout the whole system. My provider supplies a username, passcode and domain. FusionPBX (and FreeSWITCH) uses a username and passcode within the configuration. My Yealink base and phone uses a username and...
  16. K

    Error After Install

    I received this message: error: SQLSTATE[08006] [7] could not connect to server: Connection refused Is the server running on host "127.0.0.1" and accepting TCP/IP connections on port 5432? It should be looking for 192.168.1.21. Does anyone know what this means? It appears that the install may...
  17. K

    Invalid Username and/or Password

    Well, this is odd. I was just using the FusionPBX interface yesterday, but today I cannot log in. I get the error message "Invalid Username and/or Password". I made no conscious attempts at changing the password or username at all, and I cannot imagine why such a change could have occurred...
  18. K

    Definitions

    I am having trouble with understanding the meaning of words used in the FusionPBX inteface. I should mention that I have a server with FusionPBX installed, and I have a Yealink W60B base station (PoE) and a Yealink W56H handset with its base. The handset base appears to be only powered by USB...
  19. K

    Unitel Voice

    I am trying to set up Unitel Voice SIP Trunk thru FusionPBX, but I am confused. Here is what they offer: A trunk ID and/or Username A Passcode A Domain A Trunk Description I do not understand where to put these items in the FusionPBX interface. Further, they say to "Whitelist" a number of IP...
  20. K

    Multi-Tenancy Domains/Namespaces

    I am confused about domains for the purpose of multi-tenancy. Are they necessary? Can they be namespaces? Is there a way to implement them without registering for a domain name and getting separate IP addresses? What does a home office do when the ISP only assigns one IP address that must be...