Pulling my hair out here, I tested with a SPA122 and fusion about 8 months back with no issues. Pulled out the SPA122 again today, same as it was before, plugged it in and was able to make outbound calls just fine but no inbound, tested a few things but couldn't get it to work. So I factory reset it and now I cant get it to register at all.
I am just going to the SPA122 http interface and using quicksetup with the proxy for the hostname of fusion and display name/user id as the extension + password. This is what worked before but now no dice.
2020-12-11 12:55:38.449835 [WARNING] sofia_reg.c:1793 SIP auth challenge (REGISTER) on sofia profile 'internal' for [201@domain] from ip 123.456.789.123
the pbx is working just fine, above is whats in the log, this is all I see, the logging on SPA122 shows nothing helpfull
anyone used one of these with fusion, cant thing what I am missing
I am just going to the SPA122 http interface and using quicksetup with the proxy for the hostname of fusion and display name/user id as the extension + password. This is what worked before but now no dice.
2020-12-11 12:55:38.449835 [WARNING] sofia_reg.c:1793 SIP auth challenge (REGISTER) on sofia profile 'internal' for [201@domain] from ip 123.456.789.123
the pbx is working just fine, above is whats in the log, this is all I see, the logging on SPA122 shows nothing helpfull
anyone used one of these with fusion, cant thing what I am missing