Just another Provisioning Isuue Thread

Status
Not open for further replies.

krooney

Member
Jun 18, 2018
160
16
18
Hi Guys,

I am a bit stomped on this one i am having an issue provisioning older yealink models they just wont provision with https only http.
Example i can provision a Yealink T46s just fine with https://myserver.com/app/provision but a T46g wont.
Other models like Grandstream, Fanvil,etc. also provision just fine.

Any ideas

Thanks in advance
 

ricktendo

Member
Jun 12, 2021
40
5
8
Some phones like Polycom will fail to provision using https if you dont have a valid cert. Is there any difference between the firmware versions of the Yealink phones?

Maybe one has older firmware than the other, making the https prov work on one but not the other.
 

ricktendo

Member
Jun 12, 2021
40
5
8
For Yealink try this: log into the phone and go to Security tab, got to Trusted Certificates and change Only Accept Trusted Certificates
 

Attachments

  • Screenshot 2021-07-04 123235.png
    Screenshot 2021-07-04 123235.png
    838.3 KB · Views: 8

hfoster

Active Member
Jan 28, 2019
675
80
28
34
Firmware being the latest to ensure the CA is valid on the phone is one thing. Does the syslog of the Yealink shed any light on the situation? Sometimes the Yealinks can be a dream, sometimes they'll do wacky stuff stuff like send incorrect HTTP auth details. I seemingly recall a difference between the URI being /app/provision and /app/provision/ too, this was a while back so my memory is a bit fuzzy.
 

bcmike

Active Member
Jun 7, 2018
326
54
28
53
For Yealink try this: log into the phone and go to Security tab, got to Trusted Certificates and change Only Accept Trusted Certificates
Actually try the opposite of this and set it to disabled, especially if you're using a self signed cert. It's theoretically less secure as the phone will accept any cert, but for the purposes of troubleshooting I'd give it a try.
 

krooney

Member
Jun 18, 2018
160
16
18
Thanks for the reply but same issue both ways. In the yealink t46G syslog it says handshake failure but my t46S provisions fine
 
Status
Not open for further replies.