Mod Com G729

[Alfa]

Hi,

I'm trying to install mod_com_g729 on a dev server. It's a fresh debian, simply run the fusionpbx installer and follow instruction in http://files.freeswitch.org/g729/INSTALL .

All seem to run fine, It display me:

Thank You!
Running Installer
Stopping license server
Installing new license server
Installing new FreeSWITCH module
Installing activation utility
Creating license directory
Running ldconfig...
Cleaning up...

The activator running fine, but the is not mod_com_729.so in the module directory. (
/usr/lib/freeswitch/mod)

Is someone getting it propely install ? I try to specify the bin and modules directory (
/usr /usr/lib/freeswitch/mod) but still no module file

Thanks

 

[Gunner]

Hi,

Did you get this resolved? Have the exact same issue at the moment.

Thanks

 

[DigitalDaz]

Have you guys tried the following:

apt-get install freeswitch-mod-g729

 

[Gunner]

Hi

I haven't. Isn't that the pass-through codec though?

 

[Gunner]

Hi

I haven't. Isn't that the pass-through codec though?

Looks like it is installed

# aptitude search mod-g729
i A freeswitch-mod-g729 - mod_g729 for FreeSWITCH

 

[DigitalDaz]

You are probably right

 

[Nitesh]

Hi Guys I also installed the licesned codec G729A but seems not working

apt-get install freeswitch-mod-g729 this is only passthrough so
I followed the intrcutions on Freeswitch.org site and baught the license every thing went well but
when I do module_exists mod_com_g729 shows false as well as not loading using load command

 

[Nitesh]

what do I give in when it asks for Where is your FreeSWITCH install path?

 

[Jacky Wu]

Default mod path of freeswitch in FusionPBX installation is /usr/lib/freeswitch/mod.

 

[Vzb007]

but wont do transcoding

 

[DigitalDaz]

I was quite surprised to hear that this actually still works on Freeswitch 1.10 so you may want to try it, mod_bcg729: http://repo.sip247.com/debian/

There is a readme file for it.

 

[Vzb007]

I was quite surprised to hear that this actually still works on Freeswitch 1.10 so you may want to try it, mod_bcg729: http://repo.sip247.com/debian/

There is a readme file for it.

the isssue with the mod there is for ARM by the looks of it. has anyone tired this on X86.

The packages have been built on a ODroid XU4, we have also tested on Cubietruck, but should be good for Raspberry PI2, Cubox, Odroid U3 etc

Add the repo with the following:

echo "deb http://repo.sip247.com/debian/freeswitch-stable-armhf/ jessie main" > /etc/apt/sources.list.d/freeswitch.list
wget -qO - http://repo.sip247.com/debian/sip247.com.gpg.key | apt-key add -
apt-get update




Having major issues error 488

 

[DigitalDaz]

I think that mod_bcg729 is actually x86 I just dumped it there. I could be wrong, its a long time ago. If you actually bother to read properly I said "There is a readme file for it."

When we are referring to mod_bcg729 which of the readme files do you thing you should be looking at?

README-mod_bcg729.txt

 

[DigitalDaz]

Simply followed the instructions on the latest version of freeswitch:

FreeSWITCH Version 1.10.2-release-13-f7bdd3845a~64bit (-release-13-f7bdd3845a 64bit)

freeswitch@fusion-secure> load mod_bcg729
+OK Reloading XML
+OK

2020-04-14 10:27:43.371101 [INFO] mod_enum.c:884 ENUM Reloaded
2020-04-14 10:27:43.371101 [INFO] switch_time.c:1433 Timezone reloaded 530 definitions
2020-04-14 10:27:43.391095 [CONSOLE] switch_loadable_module.c:1804 Successfully Loaded [mod_bcg729]
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 10ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 20ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 30ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 40ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 50ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 60ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 70ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 80ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 90ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 100ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 110ms 1ch 8000bps
2020-04-14 10:27:43.391095 [NOTICE] switch_loadable_module.c:241 Adding Codec G729 18 G.729 8000hz 120ms 1ch 8000bps

 

[Vzb007]

error is this "

2020-04-14 14:21:21.256799 [WARNING] mod_sofia.c:2572 CODEC NEGOTIATION ERROR. SDP:

v=0
o=- 18417042 18417042 IN IP4 192.0.2.1
s=VOS3000
c=IN IP4 x.x.x.x
t=0 0
m=audio 56618 RTP/AVP 18 4 101
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:4 G723/8000
a=fmtp:4 annexa=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=rtcp:48009





codec,G.711 alaw,CORE_PCM_MODULE
codec,G.711 ulaw,CORE_PCM_MODULE
codec,G.729,mod_g729
codec,G.729,mod_bcg729
codec,MP3,mod_shout
codec,PROXY PASS-THROUGH,CORE_PCM_MODULE
codec,PROXY VIDEO PASS-THROUGH,CORE_PCM_MODULE
codec,RAW Signed Linear (16 bit),CORE_PCM_MODULE
codec,VP8 Video,CORE_VPX_MODULE
codec,VP9 Video,CORE_VPX_MODULE

10 total.

still getting the error above

 

[DigitalDaz]

Start a new thread, this looks like it has nothing to do at all with the installation of the module. One line of a log is going to do nothing to get anyone else to help you, you need to post more detailed logs.