Recent content by alaamrim

  1. A

    LinPhone template (proxy config) with Fusionpbx

    Hello everyone, I ran into an issue after setting up the Linphone template using a proxy, scanned the QR code and all the settings went to the phone as desired, however, on the phone (Android) I need to enable the option "Route all calls via above SIP proxy" in order to make calls, anyone...
  2. A

    Bridge fusion

    I would use a bride Applications>> Bridge Name: could be anything Destination sofia/<your SIP profile>/$1@<IP add>: <port> example sofia/internal/$1@8.8.8.8:5060 Turn enable on
  3. A

    Multiple registrations cannot be cleared by phones which appear in devices menu

    Just guessing here, it might help, if the phones are configured manually (sip account settings), try to delete these configurations and only use the provisioning. The second thing I will check is if there is a registration expiration time on the phone and the PBX .. I hope this helps
  4. A

    Allow users to disable their VM in FusionPBX

    Hello everyone, Is there a way to allow the user to disable their own voicemails? I looked at the variables and options; there are lots of things you can do, but nothing was about enabling or disabling the VM. I was thinking about Star Code maybe to disable or enable it?
  5. A

    Freeswitch service does not start

    Thanks everyone for taking the time to reply, eventually I convinced the client to stop using Centos and as you guys mentioned all went fine. Thanks everyone will consider this solved
  6. A

    Freeswitch service does not start

    @junction1153 Thanks for your answer, but the requirement I have is to use CentOS. Is the issue related to the OS here?
  7. A

    Freeswitch service does not start

    I noticed the following User www-data was not created directory /usr/local/freeswitch/ was not created. I installed it following the steps on the fusionpbx website: yum install wget wget -O - https://raw.githubusercontent.com/fusionpbx/fusionpbx-install.sh/master/centos/pre-install.sh | sh...
  8. A

    Freeswitch service does not start

    Hello everyone, running into strange issue, fresh installation of Fusionpbx for centos 7, its required to use this OS, fusionpbx script installs everything including Freeswtch However, FreeSwitch does not start, Here are the details: root@ip-172-31-47-80 centos]# systemctl status...
  9. A

    call not sent to voicemail

    What does your last dial plan instructions says?
  10. A

    Cisco SPA122 + Analog Trunk

    Hello, if it's one line only then you got the answer already, I would use Grandstream rather than Cisco
  11. A

    Call forwarding not working through extension

    Can you post your dialplan? its hard to say why its not working without looking at it :)
  12. A

    Interconnecting 3CX with FreeSWITCH

    @geomat I am glad you got it all sorted out, my setup is almost identical to yours. From security prospective locking it to only that IP you eliminate sources of attack as the server will only trust that IP. Another benefits that's I see with TCP over UDP is the acknowledgement and handshake of...
  13. A

    Interconnecting 3CX with FreeSWITCH

    Hello, I have the same setup you mentioned using SIP extension and auth via IP no username, its been working for a while now with no issues at all, DID's are on the FS (FusionPBX) and forwarded to that SIP extension and on the 3CX added a provider with the SIP trunk ID as that DID. it works...
  14. A

    Yealink Phone / Caller ID on a ring group

    that make sense, thanks
  15. A

    Yealink Phone / Caller ID on a ring group

    Maybe others can help with achieving this with Ring group, but I would use a Call Center for that. I hope that helps
See more
Top Bottom