Recent content by henkpls

Hi all, I was wondering if I could use the FusionPBX contacts and upload them to a Grandstream phone. Well, it doesn’t work out of the box. As I have it working now and it took a lot of my time, I will share it with this forum. I’m using the latest FusionPBX 5.1 and Freeswitch 1.10.11...

To investigate, I did a new installation on Debian 11. When I create a user, a gateway and a dial rule everything is OK. After copying only the database the problem repeats. So my conclusion is, it must be somewhere in de FusionPBX configuration, but I don't know where to look for. Who can help me?

Hi all, I'm on FusionPBX 5.0.5. In my outbound leg the RTP data is repeated twice. I don't exactly known when this started as most calls just work, except for calls to Teams. The console log looks like this: 2022-11-18 15:47:39.119302 94.53% [DEBUG] switch_core_state_machine.c:624...

I had the same problem with a Dutch mobile provider, most are working except one. In my case it was the number format which I changed from 0031 to +31, so you can try this first. In my experience most providers only accept PCMA, PCMU and G729.

After doing some more testing, also normal voicemail wasn't working. I found the solution in "Voicemail and Missed Call to email error", the language template was missing.

Hi, I have a setup where I want to have only one voicemail for multiple extensions. So I made a voicemail extension without a registration and use a Follow Me to go to voicemail. But there is no voicemail send (email has been tested). An incoming call goes directly to the extension and than...

Thank you very much! In my template and also on Github P212 is set to 1. In this case 2 this is a good default, but this is very useful for other settings. I found some defaults in /var/www/fusionpbx/app/grandstream/app_config.php and that is a lot more work to customize.

Just tested provisioning on my DP750, works great! But I'm missing a lot of settings like 'provision via' and this defaults to HTTP. So my config with password goes over the net without any encryption! Is it possible to add variables to the template?