Recent content by richarda

If that's what is considered autoprovision. But in our experience with our Cudatel PBX, which is based on Freeswitch, we see the phones show up and we never have to enter their MAC address ahead of time.

I was able to get the Polycoms and Cisco to provision if I enter the Mac address under devices first. But I setup FusionPBX on my local network and still can't get the Polycoms to auto provision. Yes, provisioning is enabled, and I've tried DHCP 66 and 160, and web provisioning. I'll check...

I was able to manually provision them, but not auto provision.

I'm having issues getting Polycoms to provision as well. Any update?

I'm almost out of ideas, but I'm going to try a Yealink or a Cisco, as the Polycoms just won't provision.

If I try to download the cfg file based on the MAC address manually, I get a 404 as well. This is the same file the 335 logs report it can't find. So it's as if the PBX isn't producing the file correctly.

Thanks. I've been testing with a Polycom 335 and haven't had much luck. Triple checked all settings necessary but getting errors using direct phone provisioning settings or the DHCP Option 66 or 160. Provisioning failed due to curl error code:22 and respCode:404

But it has to be over https and not just http?

Is it possible to auto provision phones located on my LAN to a PBX located in the cloud or do they need to be on the same subnet?