Search results

Hi, I received the following error from my provider. Is there any configuration required on FusionPBX to avoid this issue, or should the configuration be handled on the provider’s side? SIP/2.0 500 Server Internal Error Via: SIP/2.0/UDP 172.16.60.60;branch=z9hG4bK70NFB9vK9X5je;rport=5060...

It is a strange behavior. I configured the same setup without registration, but the SIP trunk still does not come up. Based on your screenshot, the only difference I noticed is that in my case I am using an IP address instead of a hostname (machine name). Could this be the cause of the issue, or...

Hi, Thank you for your feedback. I have changed the internal SIP port to 5070, and the softphones are now successfully registered after updating their configuration. However, I am still facing some confusion regarding the SIP trunk setup with my gateway provider. Specifically, I have not found a...

Hi, Is it possible to change the default internal SIP port (5060) to another port? If yes, could you please advise how to configure the softphones to connect to FusionPBX using the new port? The objective is to free up port 5060 for use with the external profile. Thank you.

Hi, After checking with IT Security, I am now receiving SIP OPTIONS from the MSC. However, FreeSWITCH is not sending any response. During my investigation, I found that configuring an ACL on the server might be required. Could you please confirm whether adding an ACL would resolve this issue, or...

Hi, Currently, I am using port 5055 as the SIP source port on the external profile. On the gateway configuration, I am sending traffic to my proxy using destination IP:5060. The security team has confirmed that port 5060 is open, and I have also verified it using telnet, which confirms...

For port 5080, it cannot be used (only ports 5001 to 5064 are allowed from their side). I have already updated the ACL and iptables accordingly. Do you suggest using another port instead of 5080?

Attached the Logs requested

So what is missing, why I can't reach my endpoint destination?

Hi, Yes, I have just done it and it installed successfully. Thank you.

Hi, I downloaded the French sound files from the following URLs: wget https://files.freeswitch.org/releases/sounds/freeswitch-sounds-fr-ca-june-8000-1.0.51.tar.gz wget https://files.freeswitch.org/releases/sounds/freeswitch-sounds-fr-ca-june-16000-1.0.51.tar.gz wget...

Is it possible to install it on a separate server from FreeSWITCH and manage the Spectel tenant from there?

Hi, in Dialplan Conditions : In Conditions section click Add. Field: destination_number Expression: ^7[0-9]{4}$ In Actions section click Add. Fill: Type: transfer Data: $1 XML ${FreePBX.domain} Save and Apply }

Hi, I would like to add the French languge sound files. Is the path below correct? /usr/share/freeswitch/sounds/fr-ca/fr/ca/june I have installed the files and verified that they were uploaded correctly, but they do not appear in the FusionPBX interface. Could you please advise what...

Try the list source attached

Thank you for the feedback. I think the issue is that the default SIP port used in the external profile is 5080, not 5060. I will ask the provider if they can align with port 5080.

Hi, I am trying to add a new gateway to bind the PBX with the MSC on port 5060. Here are the parameters I have: IP: 172.225.10.10 Port: 5060 Protocol: UDP I have configured everything on my side, but the status still shows NOREG. I have checked the routing and confirmed that the port is...

Hi, We are planning to deploy FusionPBX, and our security team has provided the following recommendations. I would appreciate your guidance on whether the architecture below is supported and how it can be implemented. Separate database server Is it possible to host the FusionPBX database on a...

Hi, How can I manage VLANs between Kamailio (acting as the SBC) and FusionPBX to properly handle VLAN segmentation and traffic routing, considering that Kamailio is in the DMZ and FusionPBX is in the backend network?

it's ok thank you brothers