Search results

  1. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    Interesting. Yours say (UDP/NAT) and mine are just (UDP) on their registrations.
  2. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    I'm not getting the local IPs showing in FreeSwitch either using these commands. I'll have to dig some more. I notice my extensions don't show NAT on the registered line any more. sofia status profile internal reg show registrations
  3. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    It isn't just Fanvil. As you can see on my original post, none of the phones show LAN and WAN IP addresses correctly. The phones have the FQDN in their main, outbound proxy, and domain listings. Do you have any pointers on how you have yours set up? My FSPBX is cloud-based.
  4. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    In the Register transaction, the phone's local LAN IP is in the message as part of the Call-ID from some phones (but not all) but that is not being picked up to display in the registration list.
  5. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    Prior to either the FreeSwitch upgrade or one of the FS PBX upgrades, my Status > Registrations would show a local LAN IP for each phone and then their WAN IP address. Now they all show the WAN IP address in the LAN column and nothing in the WAN IP column. Is this expected behavior now?
  6. kenn10

    Business Hours Module for Holiday's

    Once you add your initial business hours entry, the Holiday option appears on the left to add holiday entries.
  7. kenn10

    New Features Developed FusionPBX

    Let me point out a FS PBX feature I had missed but already exists. There are scheduled announcements already built into FS PBX. It works quite well. See this information on the setup: https://www.fspbx.com/docs/configuration/scheduled-announcements/
  8. kenn10

    Caller id issue: SOLVED

    Why would it if you have separate routes based on the number dialed. Like in the USA, typically a domestic toll number starts with "1". This separates the dial plan from local calls which are only 7-digits but don't start with"1". I know international numbers are non-standard but if you set...
  9. kenn10

    Caller id issue: SOLVED

    @pbxgeek here is a little AI assisted design to set up a table for various toll restriction/toll-allow tables and use a resulted total value of all types selected for the route to do a simple <= or >= against the numeric result to determine which calls can pass on the outbound route. Obviously...
  10. kenn10

    Caller id issue: SOLVED

    @ou812 I find the whole "toll allow" thing to be unnecessarily confusing. I've ended up beating my head against the wall until I just removed all entries in the toll allow fields on extensions. I suspect a serious study of documentation would grant more insight for me, but it really isn't...
  11. kenn10

    Current node.js and npm

    @pbxgeek Are there coding reasons you are still using node.js version 18.x and npm version 10.8? Current node.js is version 24.x and npm is 12.x. Will upgrading those affect the operation of FS PBX coding of the current release? AI suggests that the old version of Vite 4 and...
  12. kenn10

    APIBAN - does anyone use it?

    If anyone needs a script for DDNS update of the firewall for multiple dynamic dns entries, I have one I created with the assistance of AI. I have loaded it on FS PBX on both Debian-12 and Debian-13 and it adjusts for the differences in the version of Debian. You set the script to run as a cron...
  13. kenn10

    APIBAN - does anyone use it?

    I use a combination of APIBAN and VOIPBL. I have had zero attempts to hack into the system since implementing them. The following is an excerpt from a NerdVittles.com article on how to install them. Credit to Ward Mundy at IncrediblePBX.com and Nerdvittles.com.. Be aware that this restricts...
  14. kenn10

    Phone number editing does not work

    It would be helpful if the screen allows you to hover over the number and it pop up a message that number changes require the number to be deleted. I'd never thought of making a change to a number but that might help eliminate confusion.
  15. kenn10

    Phone number editing does not work

    Yeah, I just tried it. If you change the phone number, it does not update the rules on the next screen or the inbound route. Don't know if that is a bug or just a procedural issue where you should delete the old and add the new. @pbxgeek will need to comment.
  16. kenn10

    Phone number editing does not work

    I've always deleted the phone number and the corresponding inbound route for it then added the new number. I've never tried to change one. So if you choose to do a change on one, you'd probably have to modify the inbound route for the number you are changing.
  17. kenn10

    FreeSWITCH 1.11.1 Post-Upgrade SQLite RAM Storage Fix

    I rebooted the server to clear the issue. I think I failed to clear the cache and then ran it again and caused the double.
  18. kenn10

    Extensions show offline while they are not

    I've been running FS PBX 1.9.3 since before the announcement hit the forums. My extensions all show registered in Status > Registrations and in the Accounts > Extensions. I have not yet applied to day's updates.
  19. kenn10

    P-Attestation-Indicator

    Yeah. With a little AI help, I worked it out. It was just a dial plan addition. Capturing the attestation level is pretty straight forward. I didn't need to do any LUA work. Land lines still don't send attestation and I'm in an area where there are still mostly landlines. The spammers and...
  20. kenn10

    SOLVED Outbound Caller ID per Extension

    It is unnecessary to create an outbound dial plan rule. You set the outbound caller-id number on the extension itself using the GUI. Have you read the documentation for FusionPBX that explains how you do these things? Here is the link to documentation. https://docs.fusionpbx.com/en/latest/...