Search results

Well, I can confirm that is correct. I don't have any settings on my devices that have anything around SCA, and this is a feature that a lot of my clients use, so its going to be an issue going to some level of production with this... I wonder if there is a workaround or whether I can get it...

That is odd because I have seen it work in Freeswitch before on another system a while back. Isn't it odd that both the desk phone and the app will ring internally when 201 is dialed but won't ring together when 200 or the DID is dialed? Where should I be placing the following "<param...

Its just the normal install. I got it to stick, the steps I took were as follows: Change ring plan to ring group extension Create ring group with destinations and save Wait 5 minutes and then generate the the XML in the ring group interface Flush the cache and reload XML It works every time...

So interestingly my first lot that was sticking has now completely stopped working in terms of ringing the extensions in the list when I have been playing with the other tenant. So I am deleting the ring groups and then purging the cache as well as reload xml and going to leave it for 30 minutes...

@Adrian Fretwell thank you for that, I am going to test on another tenant first to see, might just be a stuck cache. I am running on the lightwight VM in this test environment. Is there anywhere that I can privately message you in order to discuss something?

And the odd thing now is that the say does not say businessman and the 200 still works. So that cache is cleared. So I guess the inbound XML needs to reload and cache needs to clear. And now it seems to be working, so evidently the clear cache needs to be done more than once, as well as the...

@whut literally have 201 and 202 nothing else in extensions, so 200 and 2000 should be available. Evidently, 200 is available. And here I thought I was just getting the hang of Freeswitch via DjangoPBX haha

It is really weird. I have cleared the cache like you mentioned and reloaded via the gui and the cli. I have left it for 5 minutes and clearly the inbound routes I have, are not updating as they should, even when I pull in the XML and it shows 200. So I guess I will give it another 20 minutes...

It seems I can now dial 200 and it plays my prompt businessman that I set, but I have already recreated the ring group to be 2000. So I am not sure whether it is just really delayed in clearing the cache and reloading the xml

Just the one is ringing as if it is still using the old dialplan. So I am not sure why that is the case as I would believe both should be ringing. I can call 201 and 202 from each other, however, if I make the ring group 200 or 2000 I cannot dial that, so maybe that is the issue?

Hi everyone. I am trying to setup ring groups and having an issue with getting it working. I've tried using extension number 200 and 2000 with the destinations being 201 and 202 and failover being 201s voicemail. I have saved it, generated XML etc and changed my dialplans to ring to 200/2000...

So I figured out the issue for inbound calls. Porta sends to 5060 and external in Freeswitch is on 5080. I put the CIDR for IP range in lan ACL and Domains ACL and reloaded the ACL and calls are now coming in. I am going to take a deep dive into Freeswitch as it is certainly robust and I think...

Thank you so much, the outbound is working now with no issues. I can even see OPUS being used as I set that up as well. One thing I did notice there is I had to go into admin -> switch -> modules in order to disable and enable the codecs. Inbound is no longer throwing an error, however, it is...

I agree with you but some people can fill the gaps that are eager to learn, and I am certainly willing to add to the project as I learn. I am fortunate that I have an elephant memory and only need to see something once to implement it again. I've been toying with routr.io and would like to at...

Thank you so much, it dials out but rings once and then stops. Looking at the logs I think I know why, however, not sure how to rectify it. 2024-02-08 16:09:27.959310 95.87% [ERR] mod_g729.c:145 This codec is only usable in passthrough mode! 2024-02-08 16:09:27.959310 95.87% [ERR]...

I'm pasting the code anyway. It is like reading Chinese, but I am noticing that it seems to be hitting Porta, so my not-so-educated guess is that may be codec or 2024-02-08 15:36:38.339326 95.73% [NOTICE] switch_channel.c:1142 New Channel sofia/internal/201@voice.unlayer.network:5060...

So I did that and the output is quite long. I see it sends the call to internal on Sofia at the domain name so it might be that, but that is trying to fly a plane when you have never even seen a cockpit before. I don't want to clog up this feed with unnecessary stuff even though it would help...

So I removed the / and tested the inbound, but it still didn't work. I connected to the trunk with my microsip softphone and it works fine, so not sure if I am doing something wrong in terms of linking the inbound with the gateway correctly. In terms of the outbound dialing, over here we just...

Thank you, I just checked that and it is quite a nice tool. Inbound I just placed the number and here is my XML <extension name="0800172793" continue="false" uuid="4500420d-841a-4960-ac30-93a2f93d776b"> <condition field="destination_number" expression="^\0800172793$"> <action...

Thanks for all the information guys. So a second installation and the whole UFW saga and being locked out is over and the install runs perfectly. Additionally, I didn't realize that I had to reload the gateway which I did and it registered. I assumed it would be done automatically. The issue I...