Invalid profile "external-ipv6"

Status
Not open for further replies.

Heinrich

New Member
Jul 2, 2022
4
0
1
69
Bremen, Germany
Hello all,

i am trying to setup a IPV6-only installation of FusionPBX. Reason is, i am on a home network behind NAT and i want to avoid any potential NAT-problems with voip over NAT.

My problem is that i cannot start the "external-ipv6" profile because the system deems it "Invalid".
If i try to start it, i get a message "Started successfully" but it is not running. If i click "rescan" (whatever that means), i get "Invalid profile". Clicking on the profile link does not show the profile but only an empty line.

How can i find the error in the profile?

FusionPBX 5.0.1
freeswitch-1.10.7.-release
Debian GNU/Linux 11 running in a VM under Vmware EXSi.
Let me know if you need any more info, i am new to this list.

Thanks for any help,

-Heinrich


Code:
sofia status
Name            Type        Data                                    State    Action
external        Profile    sip:mod_sofia@192.168.178.41:5080                RUNNING (0)     
internal-ipv6    Profile    sip:mod_sofia@[2a03:4000:xxxx:yyyy:1000::41]:5060    RUNNING (0)     
internal        Profile    sip:mod_sofia@192.168.178.41:5060                RUNNING (0)     
Status
UP 0 years, 0 days, 0 hours, 19 minutes, 6 seconds, 667 milliseconds, 180 microseconds
FreeSWITCH (Version 1.10.7 -release 64bit) is ready
0 session(s) since startup
0 session(s) - peak 0, last 5min 0
0 session(s) per Sec out of max 30, peak 0, last 5min 0
1000 session(s) max
min idle cpu 0.00/100.00
Current Stack Size/Max 240K/8192K
 

nickbh

Member
Sep 26, 2019
39
3
8
57
Check the port number associated with external profile. It might be 5060, because external_sip_port variable is not assigned. I found out by setting internal ipv6 profile to disabled.
 

DigitalDaz

Administrator
Staff member
Sep 29, 2016
3,038
556
113
Go into fs_cli and do a: reload mod_sofia

That should show you the error within that, it will be pretty verbose.
 

Heinrich

New Member
Jul 2, 2022
4
0
1
69
Bremen, Germany
Thank you for your replies. Setting sip ports to 5080 and 5081 (tls) fixed this. I wonder why this is done automatically for IP4 but not for IP6.
Also thanks for the hint about fs_cli. I did not know about this.
 

rleiva

New Member
Nov 14, 2022
3
1
3
61
I have the same error, reload mod_sofia and have the next errors, do you have the problems??

2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3369 Set params for internal
2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3416 Activated db for internal
2022-11-27 17:59:00.038152 100.00% [ERR] sofia.c:3296 Error Creating SIP UA for profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp) ATTEMPT 1 (RETRY IN 5 SEC)
2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3454 Starting thread for external
2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3046 Launching worker thread for external
2022-11-27 17:59:00.038152 100.00% [INFO] switch_core_sqldb.c:1840 sofia:internal Starting SQL thread.
2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3454 Starting thread for external-ipv6
2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3046 Launching worker thread for external-ipv6
2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3454 Starting thread for internal
2022-11-27 17:59:00.038152 100.00% [DEBUG] sofia.c:3046 Launching worker thread for internal
2022-11-27 17:59:01.538176 99.93% [CONSOLE] switch_loadable_module.c:1768 Successfully Loaded [mod_sofia]
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:172 Adding Endpoint 'sofia'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:172 Adding Endpoint 'rtp'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:329 Adding Application 'sofia_sla'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:329 Adding Application 'sofia_stir_shaken_vs'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:389 Adding API Function 'sofia'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:389 Adding API Function 'sofia_gateway_data'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:389 Adding API Function 'sofia_username_of'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:389 Adding API Function 'sofia_contact'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:389 Adding API Function 'sofia_count_reg'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:389 Adding API Function 'sofia_dig'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:389 Adding API Function 'sofia_presence_data'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:419 Adding JSON API Function 'sofia.status'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:419 Adding JSON API Function 'sofia.status.info'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:621 Adding Chat interface 'sip'
2022-11-27 17:59:01.538176 99.93% [NOTICE] switch_loadable_module.c:681 Adding Management interface 'mod_sofia' OID[.1.3.6.1.4.1.27880.1001]
2022-11-27 17:59:05.038177 99.90% [ERR] sofia.c:3296 Error Creating SIP UA for profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp) ATTEMPT 2 (RETRY IN 5 SEC)
2022-11-27 17:59:10.038179 99.90% [ERR] sofia.c:3296 Error Creating SIP UA for profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp) ATTEMPT 3 (RETRY IN 5 SEC)
2022-11-27 17:59:10.038179 99.90% [ERR] sofia.c:3307 Error Creating SIP UA for profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp)
The likely causes for this are:

1) Another application is already listening on the specified address.
2) The IP the profile is attempting to bind to is not local to this system.
2022-11-27 17:59:10.038179 99.90% [DEBUG] sofia.c:3576 Write lock internal-ipv6
2022-11-27 17:59:10.038179 99.90% [DEBUG] sofia.c:3589 Write unlock internal-ipv6
 

Testing1234

New Member
Jul 21, 2022
3
0
1
32
Thank you for your replies. Setting sip ports to 5080 and 5081 (tls) fixed this. I wonder why this is done automatically for IP4 but not for IP6.
Also thanks for the hint about fs_cli. I did not know about this.
how did u do that can u help me out i am facing the same problem brother
 

DigitalDaz

Administrator
Staff member
Sep 29, 2016
3,038
556
113
You won't find anything that matches the capabilities of FusionPBX
 
Status
Not open for further replies.