mod_translate profiles

[engelant]

My goal is to change inbound numbers to the E164 format, as I have address books in my phones, with E164 formatted contacts.

I found that mod_translate seems to be the way to go, but unfortunatly I'm stuck even before the regexes.
The profiles getting loaded are the ones in the "Advanced -> Number Translations", at least what used to be there in the original.

• strip_non_digits
• remove_leading_plus
• e164_to_GB_national
• GB_national_to_e164
• strip_symbols

In the meantime I disabled them all and created a new profile, but still no change in the reload mod_translate log.

Can anyone tell me, where these profiles come from and how I can change them?

 

[Adrian Fretwell]

mod_translate is not installed by default, you have to install it if you want to use number translations. There is some helpful documentation at the links below:
https://docs.fusionpbx.com/en/latest/advanced/number_translations.html
https://freeswitch.org/confluence/display/FREESWITCH/mod_translate

 

[engelant]

Ok, after some further investigation I found out the "wipe the fusionpbx cache (/var/cache/fusionpbx)" is not only related to the SIP profile but to the mod_translate profiles aswell.

And also, in the UI one can Enable/Disable the translations, but that setting doesn't actually make any difference?