We expect support for outbound

[yhbilisim]

Hello

We installed FusionPBX. No problem running. We have two SIP trunks and four SIP internal extensions. 1000 and 1001 will use the first of the SIP trunks
Others will use the second SIP trunk. We could not do it. What's the solution?

 

[DigitalDaz]

Create two outbound routes, on the first one, add a condition that matches extension 1000 or 1001 and send it out of first gateway. As long as that is a higher priority than second one, it should match.

 

[yhbilisim]

Create two outbound routes, on the first one, add a condition that matches extension 1000 or 1001 and send it out of first gateway. As long as that is a higher priority than second one, it should match.

Hello

Firstly, thank you.

Could you give me more detailed information on this topic?

 

[roger_roger]

Create an outbound route with this as the first condition:
condition ${outbound_caller_id_number} ^(1000|1001)$

Create a 2nd outbound route without this condition and make sure that it has a higher order number than the above route.

 

[yhbilisim]

Create an outbound route with this as the first condition:
condition ${outbound_caller_id_number} ^(1000|1001)$

Create a 2nd outbound route without this condition and make sure that it has a higher order number than the above route.

Hello

Thank you for being helpful.