SOLVED Trying to Get Cisco 7940G Provisioned

[ygDaMan77]

Hi All!

I am very new to FusionPBX so I apologize for any dumb questions or things I have looked over.

I have been trying to get some very old Cisco 7940G's to provision with FusionPBX. I installed the latest version of FusionPBX, I turned on Provisioning, and I have TFTP working. The issue I have right away is the file from FusionPBX for "SIPDefault.cnf" is 0kb so I am not sure if there is another setting I forgot to turn on for that to export correctly. Attached is what I have currently for trying to do 1 phone that I have gotten no where with other than it going and trying to fetch files from my TFTP server. Any help is super appreciated!

 

[markjcrane]

Use the device edit page, and you can download the files needed.
- Save provisioning config files using the drop-down link.
- Move the files to a TFTP server on the same network as the phones.
- Use DHCP option 66 to point the phones to your TFTP server.

 

[ygDaMan77]

Use the device edit page, and you can download the files needed.
- Save provisioning config files using the drop-down link.
- Move the files to a TFTP server on the same network as the phones.
- Use DHCP option 66 to point the phones to your TFTP server.

I appreciate the response, while the post was waiting for review and some headbanging I finally got it to work! Thanks though!