Recent content by vespaman

  1. vespaman

    Extension to Extension call quality issues

    not all phones work like the cisco. change the codecs you are using connect phones without VPN and test
  2. vespaman

    Problem with MOH in call park

    See if this helps - https://www.pbxforums.com/threads/custom-music-on-hold-not-working.2835/post-17437
  3. vespaman

    Extensions in Ring Group not ringing

    its a free product. it gets upgraded and some things change with no notice. If you are paying for support then you get more information, otherwise its just what people share here.
  4. vespaman

    Extensions in Ring Group not ringing

    go to dialplan/dialplan manager, make sure there are no number clashes here eg ring groups that may not have deleted. fusion 200 fusion.testpbx.com 101 True go to advanced/sip profiles/internal, check you have multiple registrations as below: multiple-registrations contact true...
  5. vespaman

    multiple-registrations

    Ok thanks for that. It was just a guess at the global settings syntax
  6. vespaman

    multiple-registrations

    I have multiple-registrations working across 5 domains. How do I stop multiple-registrations for one domain ? I set up a sip profile in the domain settings then restarted fpbx. I then unregistered the phones on that domain but they all just re-registered again. Any Ideas ? TIA.
  7. vespaman

    Inbound call to ring an extension, bypassing IVR

    set up a conference with no pin. use this to test your inbound route works if so see whats happening with your extn if not see whats happening with your inbound route or destination.
  8. vespaman

    Ringgrouops

    try just using an extension that is forwarded to the cellphone instead of a ring group and see what happens. so press 9 on ivr go to extn that is forwarded to cell.
  9. vespaman

    Strange registration issue

    Hi James I wasted a lot of time and money on hosting my own server. Ive used both vultr and digital ocean and some others. They are ideal for what you want to do and imho a better platform to learn/play with fpbx or any multitenant pbx. I have run a small 4 domain fpbx on a Vultr VPS in Sydney...
  10. vespaman

    call me if I get a VoiceMail

    wouldn't just getting the voice messages emailed to you work ?
  11. vespaman

    EAVESDROP not functioning

    tried this today. as you found I couldn't enter the *33extnpin# in one string either. * lets you leave the call I couldn't figure out how to end the call.
  12. vespaman

    SOLVED incoming calls not working

    Take the domain name out of the ACL. Just use the ip address/32. Looks like you do need the ACL for the external profile 5080. My bad but good to know.
  13. vespaman

    SOLVED incoming calls not working

    voip.ms can send to 5080. in your gateway put in the voip.ms proxy ip or hostname and change the profile setting to external. as DAZ said if you are using 5060 from your carrier add their IP to an ACL. I dont think you need the ACL for a carrier using 5080.
  14. vespaman

    Stange Case of Normal Clearing

    No dont add the external PBX IP to the ACL just your SIP trunk provider or SBC's. Stop and re-start gateways and freeswitch ?
  15. vespaman

    Stange Case of Normal Clearing

    Did you try updating the acl of your provider or Fail to Ban address lists if the IP address has changed ?