Search results

Happens on the same 2 handsets and both extension users hear it. Not sure about their customers at the other end though

I am hoping someone may have a clue as to what's going on. We have a user with 1 Yealink base and 3 handsets all registered as different extension numbers. Randomly 2 of the calls merge together I though someone was pushing and holding the mute button on one of the handsets so disabled the...

Yer I seen this on the T46's this week. I have changed in provisioning to the last Sunday in March instead of the 4th. local_time.ntp_server1 = 0.uk.pool.ntp.org local_time.ntp_server2 = 1.uk.pool.ntp.org local_time.summer_time = 1 local_time.dst_time_type = 1 local_time.start_time = 3/5/7/1:0

Hi All I am trying to get TLS and Encryption working. I have a company wide wildcard certificate install and tls enabled for the internal profile (we don't use the external as we lock it all down) There is a profile registered with 5061 so all good. We use Zoiper, Snom and Yealink phones. I...

Thanks for the suggestion. Just trying to get it working. Teach me to agree to something LOL

I want to create a VIP list of numbers that would send calls to alternative destination unlike normal incoming calls I can create a dialplan and pipe the numbers in but think it may be too big with the numbers I want to use. Is there anyway of getting fusion to look in a file as part of a dial...

Hi All Does anyone know how Event Guard is meant to work? I have it installed and can see ip's in the logs which it says it's blocked (multiple of the same ip) I can see these multiple have been added to ip tables but I can also see the ip address still hitting the cli trying to register...

Are these set as dstnat and not srcnat If so I am also at a loss as have many site pbx's setup behind MT routers with no issues

To be honest this smells of SIP ALG where 1 item would registered with 5060 then when the next device registers, it knocks off the previously registered device.

Mine is also on MT with dstnat rules 5060-5069 TCP 5060-5090,10000-32768 UDP External registrations such as Groundwire show up as eg 95060 In Variables have you set your public ip address in external_rtp_ip external_sip_ip

I run one of my boxes behind NAT with no issues Make sure that you have SIP ALG disabled on the router, as that will just cause you pain.

Would you just not send inbound calls to the relevant location?

Hi All I am trying to get TLS up and running on a multi domain server. The server has a valid commercial wildcard certificate up an running in Nginx which works fine. I have done the following to get it up and running in the TLS folder cat /etc/ssl/certs/ssl.crt > /etc/freeswitch/tls/all.pem...

Usually I can cobble something together for most Fusionpbx tasks but just can't get my head around this one. One of our customers wants to transfer a call automatically when a pbx user hangs up. He want to record a message to say hang on the line to do a survey, which will be a ivr with...

Hi All I have updated a server from Debian 9 to Debian 10 and then Debian 11. The freeswitch version that's used on the box if from the apt-get rather than a compiled version FreeSWITCH Version 1.10.9-release-21-a615e85afc~64bit (-release-21-a615e85afc 64bit) It's been running fine in general...

Thanks Daz

Hi All So did a full rebuild of my PBX on to a new box running Debian 11, rather than keep upgrading. I have not build a new on in a while and notices on my new build something I am a little unsure of regarding Outbound routes. When I now create an outbound route I get my main route in...

Hi All I have a need to use the pin feature on and IVR with Fusionpbx but I guess this may be a bug. When you call in to the IVR and get asked to enter the pin followed but the # it will actually reject the the pin with the # if I dial in and just enter the pin it's ok Now is there a way to...

Have we got any step by step guide to get this up an running. The more I read everywhere the more confused I seem to get LOL

Works perfecto, thanks