ASTPP <-> FusionPBX with multiple DIDs => HOW-TO <=

[Massimiliano Iavazzo]

Hello to everyone.

I would like to describe my scenario to know how manage it with best possible configuration.

Multiple incoming DIIDs -> ASTPP -> Device -> FusionPBX -> Gateway -> Extensions

In my scenario, ASTPP device is a number like 20250672. FusionPBX is registered to ASTPP creating a gateway, inserting ASTPP IP address into ACL to permit passing traffic.

Now my problem is:

calling number 1 -> astpp device 20250672. Into FusionPBX I need to create a Destination label identical to 20250672 to receive call and apply relative dial plan.
calling number 2 -> astpp device 20250672. Now I can't apply a different dialplan based on called number, because in FusionPBX I have only one match always to 20250672.

Is there a method to modify 20250672 with real called number to create a destination label to implement different call flow for each of them?

I wouldn't create multiple device under astpp and multiple gateway under FusionPBX to match every number if it is possible.

Any suggestion to do that?

Thank you.

 

[Massimiliano Iavazzo]

I would add more I wouldn't use an IP authentication due to multi-tenant of FusionPBX used for different customers

 

[ad5ou]

The bridge statement in one of the messages in link below should help. I’m not sure exactly where/how it would be set in a astpp. The link is discussing using Fusion as a sip trunk provider but since astpp is still Freeswitch, the general method is same.
https://www.pbxforums.com/threads/providing-sip-trunks-via-a-fusionpbx-server.1040/