BLF on Yealink Endpoints

Status
Not open for further replies.

poddieau

New Member
Oct 9, 2018
5
0
1
35
Hi All,

I have a few Yealink T41-S, T46-S and T54-S Endpoints which are all having issues with BLF.

I have setup a call flow and assigned it a feature code of *300.

I have then setup a DSS key as per below:
Line Key 3, Type = BLF, Value = *300, Label = Nightswitch, Line = Line 1, Extension = Blank

When I press Line Key 3, the call flow switches states as it should, the light changes briefly from Green to Red, then a minute or so later, it changes back to Green.

The call flow remains in the correct state, just the light changes back.

Has anyone had any issues with this? Is there something I need to configure for the light to remain in the correct state until the button is pressed again?

Appreciate your assistance :).
 

chrisbware

New Member
Apr 17, 2018
27
2
3
Italy
chrisbware.wordpress.com
I've fixed it enabling a lua script.
- Go to Advanced->XML Editor
- Edit script : /etc/freeswitch/autoload_configs/lua.conf.xml
- Uncomment <param name="startup-script" value="call_flow_monitor.lua"/>
- Restart Freeswitch, reboot the phone
 
  • Like
Reactions: etsiot

ou812

New Member
Nov 2, 2016
28
4
3
61
Thanks chrisbware that works great, I wonder why that's not part of the default settings, seems there are a few blf button issue's with this distro.
 
Status
Not open for further replies.