fax setup question

[yaboc]

hi,

I have did from flowroute which is t38 enabled. Inbound fax works (when number destination is set to fax server), but how would i go about using it as a shared voice/fax line? Should i set fax server as first destination and ext as second?
Also outbound fax from fspbx get stuck on sending and eventually fails. I'm testing it with cocofax free tier.

 

[Aryn Nakaoka]

I find you can use FusionPBX fax interface and just make sure you have your modems setup to start slow, then find a fax speed that works.

I've also tested over flowroute, works... depending on how many minutes you should look at others carriers.

 

[yaboc]

I find you can use FusionPBX fax interface and just make sure you have your modems setup to start slow, then find a fax speed that works.

I've also tested over flowroute, works... depending on how many minutes you should look at others carriers.

im using FSPBX so not sure if the interface is the same as in FusionPBX but there's not much in there to specify fax speed and other settings. this is probably a place in Default Settings page. I thought FSPBX tries different setting combinations to send fax, so it looks like it fails all of them. i'm testing it with cocofax.comTc which is an efax service.