Hi folks,
i have a problem which i am currently not able to solve...
I have a Gateway which requires the setting 'extension-in-contact' and the extension has to be the phone number in e164 without leading plus.
The Gateway registers successfully, and outbound calling is working well.
But inbound calls never work. If i make an inbound call, the call enters the pbx multiple times.
It is a number from german provider "1und1" but i only have some recommendations for asterisk:
from https://community.freepbx.org/t/config-problem-1und1-provider-germany/72407/7
Am i missing something?
Thanks!
i have a problem which i am currently not able to solve...
I have a Gateway which requires the setting 'extension-in-contact' and the extension has to be the phone number in e164 without leading plus.
The Gateway registers successfully, and outbound calling is working well.
But inbound calls never work. If i make an inbound call, the call enters the pbx multiple times.
It is a number from german provider "1und1" but i only have some recommendations for asterisk:
from https://community.freepbx.org/t/config-problem-1und1-provider-germany/72407/7
I´ve got the Solution
It is true to setup 1und1 about telekom.
But some Caracters is to set:
“Hauptleitungen”
inband Progress = yes
Force rport = yes
Server URI: sip:49XXXXXXXX@sipbalance-c-bap.1und1.de
Client URI: sip:49XXXXXXXX@sip.1und1.de
Send Connected Line = yes
Username is right “049phonenumber” eg (4989123456)
@dirk:
when i don´t set the options i recieve more than one call.
And thank you for help
Am i missing something?
Thanks!
Last edited: