Grandstream Template Updates

[Kenny Riley]

Hello

It seems that the Grandstream templates available at Github are pretty out of date. I am trying to get a template configured for the GXP 2160 and the template available from Github is for firmware version 1.0.7.97 and my phones are running 1.0.9.26.

Link: https://raw.githubusercontent.com/f...ates/provision/grandstream/gxp2160/{$mac}.xml

I was going to attempt to create my own updated templates using the Grandstream XML configuration generator tool, but there are a ton of FusionPBX variables within the template required in order for it to work with FusionPBX that I can't set using the Grandstream XML configuration tool.

Is there any way I can get these templates updated for the newer version of firmware available for the Grandstream line of phones?

 

[Kenny Riley]

I guess I should post why I am trying to update the XML file in case anyone can offer an alternate solution.

On the GXP 2160, I typically only configure account 1, and set all 6 line keys to use account 1 -- where as by default, each line key is set to use it's own separate account.

I don't see the P codes in the config file from Github (https://raw.githubusercontent.com/f...ates/provision/grandstream/gxp2160/{$mac}.xml) to set each line key to use account 1, but if I download the most up to date config template from Grandstream, I can see the options to perform this modification.

So either I need to get that working with the template posted above from Github, or update the template for the newer version of firmware.

Any advice would be appreciated!