First you have to create an extension in FUSIONPBX example extension 1000. Once this is done, configure the trunk in Panasonic HTX32 / 824 as follows: Go to external line - SIP external line properties - SIP operator 1: place the data of SIP registration of the extension in FUSIONPBX as follows: provider name = any name. SIP server = domain or IP of FUSIONPBX. SIP server IP address = FUSIONPBX server IP. SIP server port number = 5060 (or 5080). SIP server domain = domain or IP of the FUSIONPBX server (example etc.etc.com or XXX.XXX.XXX.XXX).
Account:
Name: FUSIONPBX extension number (for example 1000). Authentication ID = same as name (1000). Password = SIP account password in extension 1000. Register: ACTIVATE. Everything else is unchanged except selecting the proper codecs, and out-of-band tones (RFC 2833). Click on apply apply now or later (the latter if it is in production) that's it.
Good look.
Account:
Name: FUSIONPBX extension number (for example 1000). Authentication ID = same as name (1000). Password = SIP account password in extension 1000. Register: ACTIVATE. Everything else is unchanged except selecting the proper codecs, and out-of-band tones (RFC 2833). Click on apply apply now or later (the latter if it is in production) that's it.
Good look.