SOLVED Time Conditions not working

Status
Not open for further replies.

rcostain

New Member
Oct 28, 2021
4
1
3
60
I created a time condition to change the IVR to an announcement followed by a hangup after office hours. I assigned an unused extension to the time condition and set the time condition as the destination for incoming calls from the SIP trunk.

In setting it up, I followed the documentation to the letter. However, setting the time condition as a destination results in a "circuits busy" error. What did I do wrong?

I've attached a screen capture of the dialplan for the time condition. The transfer actions for the time condition, 300 & 302 are IVRs. Both have been tested and work as destinations on their own.
time_condition_dialplan.png
 

rcostain

New Member
Oct 28, 2021
4
1
3
60
OK... That's weird. This time it seems to work... I'll have to test that the time condition switches IVRs correctly at the end of the day, but the calls are coming through now.
 
  • Like
Reactions: bdmonsey
Status
Not open for further replies.