Voip Innovations- Outbound

Status
Not open for further replies.

zenvoip

Member
Jul 19, 2018
36
2
8
58
I am using Skyetel and Voip Innovations as well.
I have no issues with inbound call with voip innovations.
I am having issues with outbound calls going out please.
 

Kenny Riley

Active Member
Nov 1, 2017
243
39
28
36
Well... have you checked the logs or sngrep when placing an outbound call? If you posted those, that would be helpful..
 

zenvoip

Member
Jul 19, 2018
36
2
8
58
sip id.jpg
So do have out bound calls working now were I am stuck is the Voip Innovations stated that this what is coming over as caller ID.
I did setup the Gateways as external.
After that I am stuck..
 

markjcrane

Active Member
Staff member
Jul 22, 2018
447
162
43
49
Make sure not to use the formatting for the number as carriers typically want to see numeric only.
 

Kenny Riley

Active Member
Nov 1, 2017
243
39
28
36
Sounds like you need to add an outbound route for E911.

Dialplan > Outbound Routes > Add
Choose your gateway
Hit the dropdown for dialplan selection and select 911 Emergency.
 

Attachments

  • Screen Shot 2018-11-28 at 4.02.59 PM.png
    Screen Shot 2018-11-28 at 4.02.59 PM.png
    123.9 KB · Views: 24

Kenny Riley

Active Member
Nov 1, 2017
243
39
28
36
Do you have something specified in the Emergency Caller ID and Emergency Caller ID Number for the extension that you are attempting to call 911/933 with?
 

markjcrane

Active Member
Staff member
Jul 22, 2018
447
162
43
49
"This has to be filled with DID" - Actually that is a label for humans and has no relevance to making it work.
 
  • Like
Reactions: Kenny Riley

paradym

New Member
May 26, 2017
11
1
3
39
I use Voip Innovations without issue.
Make sure the gateway is set to no register, you have a dummy username/pass, and, under advanced, set Caller ID in From to true.
 

zenvoip

Member
Jul 19, 2018
36
2
8
58
I did all that It was still giving me that message on pcap.
1543524603123.png
I use Voip Innovations without issue.
Make sure the gateway is set to no register, you have a dummy username/pass, and, under advanced, set Caller ID in From to true.
canyou give me call please at 209-370-1930
 

DigitalDaz

Administrator
Staff member
Sep 29, 2016
3,038
556
113
In the gateway advanced settings set caller id in from to true. Then stop and start the gateway.
 
Status
Not open for further replies.