does fusion support orange pi pc?

Status
Not open for further replies.

OLO

New Member
May 5, 2017
28
1
3
I installed debian 8 on orangepi pc and tried below times, but always got errors:

wget -O - https://raw.githubusercontent.com/fusionpbx/fusionpbx-install.sh/master/debian/pre-install.sh | sh
cd /usr/src/fusionpbx-install.sh/debian && ./install.sh

First, certificate not activated, so I tried wget without certificate

then, /usr/src/fusionpbx-install.sh is not a folder, and the script stopped and exited.

I don't know if fusionpbx supports orange pi pc, or need do something before installing. Please advise!
 

DigitalDaz

Administrator
Staff member
Sep 29, 2016
3,038
556
113
It should be fine, before you run the script do:
Code:
apt-get install ca-certificates
 

OLO

New Member
May 5, 2017
28
1
3
DigitalDaz, it's very interesting FusionPBX works on orange pi pc much better than raspberry pi 3. I assumed raspberry pi should works well with fusionpbx, but too many bugs, probably the problem was caused from RP3's image. The only thing I worry just the SD card's life.
 

DigitalDaz

Administrator
Staff member
Sep 29, 2016
3,038
556
113
@OLO I do not know the orange pi at all, maybe will have to buy some. A board I am playing with at the moment is a Rock64, I have made a cluster of them.

There are also a few tricks to make the PI sd a little more durable, I will see if I can get a little article together.
 

OLO

New Member
May 5, 2017
28
1
3
well, Orange Pi PC encountered freeswith interrupted today after three-week running. fortunately recovered by " service freeswitch restart".

try raspberry pi 3 again,use installing script on centos and raspbian today. both failed.

decide to stop testing on arm-device, I think currently x86 is only platform for fusionpbx
 

DigitalDaz

Administrator
Staff member
Sep 29, 2016
3,038
556
113
There is no problem with arm, you just have to get it configured and optimized, I had an odroid u3 in production for two and a half years serving a 20 user office.
 
  • Like
Reactions: Dan

Ian Oakes

Member
Oct 14, 2016
51
9
8
43
The orange pi's are great little SBC's and those h3 procs are pretty great. However, they are hot, and the lack of os graphic drivers is a pain and locks the thing up hard when you try to use it. So the key here is to make sure its got a proper heatsink and fan and they run fine.
 

OLO

New Member
May 5, 2017
28
1
3
The orange pi's are great little SBC's and those h3 procs are pretty great. However, they are hot, and the lack of os graphic drivers is a pain and locks the thing up hard when you try to use it. So the key here is to make sure its got a proper heatsink and fan and they run fine.
My orange pi has no heat problem if as pbx server. No fan need. However it's definitely very hot if running desktop version OS.
 

pacmen

New Member
May 13, 2018
15
0
1
33
Did you manage to install fusion with armbian on your orangepi pc? or just with the debian 8 img on the orangepi site?.
 
Last edited:

OLO

New Member
May 5, 2017
28
1
3
Did you manage to install fusion with armbian on your orangepi pc? or just with the debian 8 img on the orangepi site?.

In my experience, images from armbian is much better than official image, which is basic OS and you need to configure/tune up yourself. This company seems not interested in improving their image, but they are very happy to release various board.

However, you may try another board: rock64, which is getting more and more popular because it comes with giga network and one usb3.0 port, and rock64 has one socket for emmc, which provide an optional for more durable system disk. also supported by armbian

123.jpg
 
  • Like
Reactions: Dan
Status
Not open for further replies.