Search results

  1. kenn10

    New features I see :-)

    Or their inactions and lack of adequate support for the community.
  2. kenn10

    FreeSWITCH 1.11.3

    The git pull doesn't seem to be getting it. git stash git pull No local changes to save Already up to date. > version FreeSWITCH Version 1.11.1-release+git~20260526T204126Z~c2c59645f6~64bit (git c2c5964 2026-05-26 20:41:26Z 64bit)
  3. kenn10

    Is v5.5 recommended for production, or should I still stick to the master branch?

    I've been on version 5.5.x for several months without issue. You can run it on Debian 12 or Debian 13. Also, FreeSWITCH has been upgraded as well so check the forums to see if you need to upgrade it. On a fresh install, you'll get the new version.
  4. kenn10

    Phone will receive ext to ext calls, but that's all.

    AI Says: To configure a Polycom digit map for FS PBX (a modern FreeSWITCH-based platform), you need a dial plan that properly aligns with your system’s internal extension length and standard North American or regional dialing rules. [1] Because FS PBX relies on a clean, immediate routing...
  5. kenn10

    upgrade ?

    If you make any manual changes to FS PBX or FreeSWITCH or config files, you need to git stash. This is the script I use: cd /var/www/fspbx git stash git pull php artisan app:update php artisan migrate
  6. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    @pbxgeek SIP ALG is disabled and due to the new router firmware, everything works well without it. I was happy to see all of my phones are displaying the local IP.
  7. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    Its a mystery to me but in my case, I'm sure SIP ALG was deliberately making sure the external IP was being sent. Now with latest router firmware on my TP-Link M707v2 router, and SIP ALG turned off, the local IP's are definitely being sent in the registration header contact. Every single device...
  8. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    That was exactly it. My router had that turned on so that Smartphone wifi calling could work. I have since had a router firmware upgrade. I just turned off the SIP ALG and now I see the local IP addresses and Smartphone wifi calling works now. I still wonder why it worked on FusionPBX but...
  9. kenn10

    LENNY on FS PBX

    Here is the recommendation from Ward Mundy at NerdVittles.com:
  10. kenn10

    Fax Stuck Sending

    If you don't have Status > Fax Queue then you don't have permissions set up correctly. I'm on version 1.9.7.
  11. kenn10

    LENNY on FS PBX

    OK. Explain for the class what you did.
  12. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    I'm looking at registrations of several different phones and only a few include the local LAN IP in the call-id string. Some include some hex hashed string that I have no idea how to decode. Most don't include anything that would indicate local LAN IP. Like you said, its is something we all...
  13. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    Well, I'm not deep into the code and have no reference for what is FreeSWITCH and what is still FusionPBX and what is purely FS PBX. I know Dereck is working very hard to evolve the product away from all things FusionPBX. My only concern is that the report should work correctly if it is going...
  14. kenn10

    LENNY on FS PBX

    I've messaged Ward Mundy to take a look at his article and see what needs updating.
  15. kenn10

    LENNY on FS PBX

    Yeah. This doesn't work with current FSPBX. That was back when it was largely based on FusionPBX.
  16. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    If registrations.php is the same in FusionPBX as it is in FS PBX (I'll make that assumption) then why would the exact same phone which does not show local IP on FS PBX then show the local IP when it registers to FusionPBX. I'll spend some more time with sngrep to look at the register request...
  17. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    One more curious data point: I failed the router onto the backup cable modem port which has a very different IP address and still get that WAN IP address in the LAN IP field:
  18. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    On the advanced screen of the extension, I've tried setting this: which yields this on the registration report: So that just puts the external IP address in both LAN and WAN fields and does not display the actual internal LAN IP. None of the choices on the SIP Force Contact box (Or leaving it...
  19. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    It could be. Since my phones are on the 192.168.10.x private network and my WAN public IP from Frontier is 192.138.x.x, perhaps it thinks they are on the same network. However, according to what I researched yesterday, FreeSwitch is supposed to base internal vs. external on what is set in...
  20. kenn10

    LAN/Local IP Address in Status > Registration <SOLVED>

    On my Fanvil phone, exact phone, just changed registration to my FusionPBX address and it shows correctly: