Search results

I have a single domain on the server. I have managed to install the certificate correctly, but then I don't understand the procedure to renew it.

In the fusionpbx documentation, I don't understand the procedure to renew the lets encrypt certificate, I have already received the expiration notice email. I have tried with certbot but it does not detect the installed certificate. I appreciate any help.

I have tried. the call goes out but is cut off. If I disc manually and very slowly it calls without problems. I'm going to rest a bit. then I go on and see maybe how to determine the transmission time of dtmf. it may take longer to emit the dtmf tone. In active calls application column it says...

ok I'm going to try this. Thank you.

I had created a dial plan that was working at least until accessing the DISA of the other panel but it did not send the dtmf. I'm going to try to modify it or create another one. I had selected that the user dial 5 + number to exit.

ok, thanks a lot, I'm going to try this now. The only difference is that I am not leaving through a gateway but through a merge extension (10000), which provides service to an external SIP line from the other central. In the string bridge = sofia / gateway / {your gateway here} / * 47 * 12340 $...

but have insert DTMF. Thanks !!!

Hello, thanks for answering!! Yes. I need you to dial that code because it is the access to the PSTN lines of that central. Currently I do it by dialing manually. That is to say: disk 100, DISA attends, disk * 47 * 12340 + number. The 0 is to take the PSTN line.

First you have to create an extension in FUSIONPBX example extension 1000. Once this is done, configure the trunk in Panasonic HTX32 / 824 as follows: Go to external line - SIP external line properties - SIP operator 1: place the data of SIP registration of the extension in FUSIONPBX as follows...

Hello from Argentina, Cordoba. I work since 25 years ago in telephony and networks. Thanks for all ! I am happy to be here. Best regards to all and I hope you are well

Hello, I have a fusion extension (100) (let's call it PBXA) in which a trunk from another exchange is registered (let's call it PBXB). I can make calls between extensions of both exchanges. But the call from fusion ends in the DISA of the PBXB, example the extension 25 of fusion calls to the 31...

Hola Lorena ! soy Alejandro de Argentina. Soy nuevo en fusion, como estàs ? tengo algunas dudas y quiero preguntarte si al menos sabes donde encontrar la respuesta. . Te envio un saludo

I had previously configured port 5080

I solved part of the problem. In the trunk of the Panasonic PBX configure the port 5060 so that it is registered in the FPBX extension and now I can make and receive calls between the two exchanges without problems. It remains to solve the problem of the trunk in FPBX against a Panasonic extension.

Hello from Argentina, greetings to all. I have been working in telephony and telecommunications for 25 years. For 6 years in IP telephony. Having implemented several solutions in telephony, from paid systems to free ones. I just joined FUSIONPBX, implementing it on a national Cloud Server. Works...