Search results

Hey there, I'm on FusionPBX 5.3.4 I'm trying to get CallPark working on a Yealink T46U on firmware 108.87.0.15 I have tried configuring the Call Park DSS key as BLF and Call Park, going to park+*5901. When in tha call and I press the DSS key, it just seems ot hangup the call. Thinking I must...

Hey Everyone, I am running on FusionxPBX 5.3.8. I have enabled TLS and SRTP. I have a Yealink and a Grandstream phone for testing. Both set to Mandatory SRTP. When I make outbound calls from either handset, I get valid encryption: AES_CM_128_HMAC_SHA1_80 from the Yealink and AEAD_AES_256_GCM...

Hey Everyone, I've set this up on a FusionPBX 4.5 box and it works as expected. Trying to set this up on a FusionPBX 5.3.4 box and it isn't working for me. What I did on the old server, was create a trunk domain (ie. trunkxxx.xxxxx.com) Created a 9999 extension, which the end client registers...

I want to make a change to the /etc/freeswitch/autoload_configs/logfile.conf.xml file. Is there a way to make freeswitch reload the config file without dropping registrations, calls, etc? Thanks, Bob

Hey Everyone, I have set up a Fax Server for a client, which seems to work OK, but faxes are being accepted at 14400 baud rate, which can have some issues. Is there a way to limit the transmission speed to 9600? Thanks, Bob

Hey All, I have a school as a client, and their old paging system has bit the dust. I tried just using paging by extension, but run into an issue with the number of extensions, so I am thinking better way is to use Multicast paging. I have some questions on if I can set it up as they want...

I am having an issue with a gateway with Jive.net (GotoConnect is the new name) An inbound call is passing the FROM information as the username of the gateway, then +phone number. Ex. 0zQFTo7cYVdESeD1fio3EK9TpYUP19+xxx5551212 I can't do alpha numberic in the destination number, so is there a...

I've noticed that if a voicemail email doesn't get delivered for what ever reason, it never gets retried. Is there a way to have it retry sending the emails? I'm running 4.5.24. Thanks

Hey Guys, I created a new tenant domain on a FusionPBX 4.5 server. All other tenants work correctly. The new tenant, I am moving from a different FusionPBX server. I did an export of the extensions and devices from the old server and imported them using the Web GUI into the new server...

Is there a way using fs_cli to show all the parameters for the internal SIP profile while it is running? I need to compare the configs from an older version of Fusion to the current one. I've tried comparing the options in the GUI and those all look the same, but something that working in the...

Hey Guys, I'm getting a weird error from a soft phone device that is having an issue with a session timer. A call will work, but about 3 minutes into the call, it will ring again. And then disconnect the first call if it isn't answered. This is the errors I get from the call: 2021-02-16...

I have a Grandstream GXP2135 in an office. The phone decides on it's own to be busy. Meaning incoming calls go to voicemail. Outgoing work fine. If I check the log of a call to this extension, I get a USER_BUSY result and it goes to voicemail. If I check active calls, it is not on a call. The...

Is it possible to have one voicemail box for all extensions? Each individual extension does not need voicemail, but we do need a generic voicemail box for everyone. I would assume I need to point each extensions voicemail box to say an extension 200 which has voicemail, but I don't see how to...

Is there a way to tell how what the peak concurrent calls are on a given FusionPBX system? If I go to Status -> Sip Status, I see the following: Would the peak number be this? I can't really find exactly what these stats mean. Or if I go to Status -> System Status, there is are entries...

I am having a strange issue issue with Ring Groups. I have set up a ring group with Enterprise strategy. It dials 3 extensions (2 x Grandstream GXP2135 and 1 x Grandstream DP750). Everything works fine for the 2 x GXP2135 phones, but if you answer the call on the DP750, it just drops the call...

I have a strange request. I have a client that uses Call Parking. They are asking if it is possible that when you put a call on park, the label changes to the phone number of the caller? I thought it would be in the DialPlan Manager -> valet_park entry and change the effective_caller_id field...

I maybe doing something wrong, but I am trying to send a CallerID Prefix to an extension by setting the Caller ID Name Prefix option in the IVR page. But it doesn't seem to get passed. If I check the call detail record, I don't see the prefix being added. Am I missing something? Thanks

I have a client that wants to be able to forward voicemails that he receives to his assistant. I dial *97, login as him, get to the message he wants to forward. press 8 put in the extension to forward it to, press 1 to record a message for it, and it just sends the message off. It seems that...

I am using Click-To-Call for a client and it is working well. Came across a small issue, where I don't see the Destination Caller ID Name and Number being passed to the actual API call. If I do it from the webpage, fill in all the options, click Call, it works but the API code put at the top of...

I have a client that uses a modem to call their clients from a proprietary piece of software. I have the modem going into both ports on a ATA, with one of the lines autodialing an extension. The ATA is programmed for an extension in Fusion (say 201). This works to let the modem place the call...